>

Hyundai Equus: 4&OD Clutch Control Solenoid Valve Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: 4&OD Clutch Control Solenoid Valve Specifications

Specifications
Direct control VFS[4&OD/C]
x Control type : Normal high type
Control Pressure kpa (kgf/cmx, psi)
0~1569.06
(0~16,0~227.57)
Current value(mA)
0~1100
 Internal resistance(x)
5.0~5.6

    4&OD Clutch Control Solenoid Valve Description and Operation
    Description 4&OD Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 4&OD Clutch. ...

    4&OD Clutch Control Solenoid Valve Schematic Diagrams
    Circuit Diagram ...

    See also:

    Filter replacement
    It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air. Main air cleaner 1. ...

    Repair procedures
    Adjustment Glass Adjustment     • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove the front door trim. (Refer to F ...

    Spark Plug Repair procedures
    Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com