Hyundai Equus: Sedan Front Body
| Front body A |
|
|
|
| Roof panel front corner | Front pillar outer corner | Hood hinge mounting hole (O13) |
|
|
|
| Shockabsorber mounting hole (O24) | Front end module mounting hole (O9) | Cowl top cover mounting hole (O7) |
| Front body B |
|
|
|
| Hood hinge mounting hole (O13) | Front end module mounting hole (O9) | Fender apron panel tooling hole (O7) |
|
|
|
| Cowl top cover mounting hole (O7) | Front side member tooling hole (O8) | Front side member tooling hole (O11) |
|
| |
| Wiring harness mounting hole (12X16) | Wiring harness mounting hole (12X16) |
| Front body C |
|
|
|
| Fender apron panel tooling hole (O7) | Front side member tooling hole (8X8) | Front side member tooling hole (O7) |
|
|
|
| Front side member tooling hole (O8) | Front side member tooling hole (O11) | Wiring harness mounting hole (12X16) |
|
|
|
| Wiring harness mounting hole (12X16) | Front crash member bracket tooling hole (O9) | Front crash member bracket tooling hole (O9) |
General Information
General
1.
Basically, all measurements in this manual are taken with a tracking gauge.
2.
When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
3.
...
Sedan Side Body
Side body A
Front side member tooling hole (O8)Fender apron panel tooling hole (O7)Front door hinge upper mounting hole (O13)Front door hinge lower mounting hole (O13) Fender mounting hole (O6.6 ...
See also:
Trunk Lid Back Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply p ...
Rear-Facing child restraint
WARNING
NEVER install a child or infant restraint in the front passenger's seat. Placing
a rear-facing child restraint in the front seat can result in SERIOUS INJURY or
DEATH if the child ...
Output Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com