Hyundai Equus: Tires/Wheels

Trailing Arm Repair procedures

Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the trailing arm (A) from the rear axle by loosening ...

Alignment Repair procedures

Wheel Alignment When using commercially available computerized four wheel alignment equipment (caster, camber, toe) to inspect the front wheel alignment, always position the car on a level surf ...

See also:

Driver's attention
The driver must be cautious in the below situations for the system may not assist the driver and may not work properly. The lane is not visible due to snow, rain, stain, a puddle or many other ...

Tilt & Telescope Control (SCM) Description and Operation
Description The Tilt & Telescope operation function in SCM contains of the following function. 1. Manual control with direction switches (Tilt Up/Down, Telescope Forward/Backward). 2. Pla ...

VSM OFF Switch Schematic Diagrams
Part Circuit Diagram ...