Hyundai Equus: Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams

Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification Pressure[kPa (kgf/cmx, psi)]Output Voltage (V)20.0 (0.20, 2.9)0.7946.7 (0.47, 6.77)1.84101.3 (1.03, 14.7)4.0 ...

Manifold Absolute Pressure Sensor (MAPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Tur ...

See also:

SRS Control Module (SRSCM) Description and Operation
Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does ...

Repair procedures
Compression Pressure Inspection     If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up engine to norma ...

Injector Drive Box (IDB) Repair procedures
Remove 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the IDB cover (A). 3. Disconnect the IDB Connector (A). 4. Remove the mounting bolts (B), an ...