>

Hyundai Equus: Manifold Absolute Pressure Sensor (MAPS) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2021 Service ManualHyundai Equus: Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification
Pressure
[kPa (kgf/cmx, psi)]
Output Voltage (V)
20.0 (0.20, 2.9)
0.79
46.7 (0.47, 6.77)
1.84
101.3 (1.03, 14.7)
4.0

    Manifold Absolute Pressure Sensor (MAPS) Description and Operation
    Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog si ...

    Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams
    Circuit Diagram ...

    See also:

    Programming
    To train most devices, follow these instructions: 1. For first-time programming, press and hold the two outside buttons ( , ), HomeLink® Channel 1 and Channel 3, until the indicator light begins ...

    Air Filter Description and Operation
    Description The air filter removes any impurities in the intake air. Composition This component consists of an air filter, silencer, bracket, and more. Function of air filter • Eliminates a ...

    Front / Rear Parking Assist System Control Unit Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the BCM unit. (Refer to Body Control Module - "Body Control Module") Installation 1. Install the BCM unit. 2. Conne ...

    Categories

    Hyundai Equus Manuals

    © 2011-2021 Copyright www.heqmanual.com