Hyundai Equus: Lane Departure Warning System (LDWS)

PGS Unit (Back & Blinde Unit) Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to Body - "Crach Pad") 3. Remove the glove box housing connector (A). 4. Remove t ...

Components and Components Location

Components 1. LDWS ON/OFF Switch2. Instrument Cluster3. LDWS Unit4. Camera Module ...

See also:

Repair procedures
Inspection Initialization and diagnosis sequence by using diagnostic equipment Below content summarize the procedure for A/S using Diagnostic equipment Download Parameter 1. Select "AFLS" menu ...

CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specifi ...

Temperature Control Actuator Description and Operation
Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the ...