>
Component Location |
Hood Weatherstrip Repair procedures
Replacement
1.
Remove the glue on end of both sides before removing the hood weatherstrip (A).
•
Be careful not to scratch the hood weatherstrip.
2.
Installatio ...
Tire Repair procedures
Tire Wear
1.
Measure the tread depth of the tires.
Tread depth [limit] : 1.6 mm (0.063 in)
2.
If the remaining tread (A) depth is less than the limit, replace the tire.
  ...
Oil Pump Components and Components Location
Components Location
1. Oil seal2. Reaction shaft3. Housing4. Cover5. O-Ring6. Reaction shaft7. Snap ring8. Needle bearing9. 8LR/B return spring10. 8LR/B piston
...