Hyundai Equus: Accelerator Pedal Description and Operation

Filler-Neck Assembly Repair procedures

Removal 1. Disconnect the fuel filler hose (A) and the leveling hose (B). 2. Disconnect the vapor hose quick-connector (A) after removing the trunk luggage trim. 3. Remove the rear-LH whee ...

Accelerator Pedal Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Disconnect the accelerator control ...

See also:

Operating Door Locks From Outside the Vehicle
To lock the doors, press the button on the outside door handle while carrying the Smart Key with you or press the Door Lock button on the Smart Key. Put your hand in the driver’s outside door h ...

Height Adjust Repair procedures
Replacement 1. Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Pretensioner") 2. After loosening the mounting bolts, then remove the height adjustor (A) ...

Trunk Lid Trim Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...