>
Hyundai Equus: Specifications
| Specifications |
| Item | Specification | |||
| Steering Gear | Type | Rack & Pinion | ||
| Rack stroke | Manual | 144mm | ||
| AIR | 136mm | |||
| Power Steering Motor | Type | BLDC (WET type) | ||
| Voltage | 13.5V | |||
| Steering angle (Max.) | Inner | R17 | Manual | 42.67°±1°30’ |
| AIR | 41.59°±1°30’ | |||
| R18 | Manual | 42.66°±1°30’ | ||
| AIR | 41.58°±1°30’ | |||
| Outer | R17 | Manual | 34.06° | |
| AIR | 33.45° | |||
| R18 | Manual | 33.94° | ||
| AIR | 33.33° | |||
| Power steering oil | PENTOSIN CHF202 | |||
| Item | Tightening torque | ||
| Nm | kgf.m | lb-ft | |
| Hub nuts | 90.0 ~ 110.0 | 9.0 ~ 11.0 | 65.0 ~ 80.0 |
| Steering column mounting bolts and nuts | 32.0 ~ 37.0 | 3.3 ~ 3.8 | 24.0 ~ 27.4 |
| Bolt connecting steering column to universal joint | 32.0 ~ 37.0 | 3.3 ~ 3.8 | 24.0 ~ 27.4 |
| Tie rod end to front axle | 88.0 ~ 108.0 | 9.0~11.0 | 65.0 ~ 80.0 |
| Steering gear box to bracket | 20.0 ~ 30.0 | 2.0 ~ 3.0 | 14.0 ~ 21.0 |
| Steering gear box mounting bolts - RH | 85.0 ~ 110.0 | 8.5 ~ 11.0 | 62.0 ~ 80.0 |
| Steering gear box mounting bolts –LH | 110.0 ~ 130.0 | 11.0 ~ 13.0 | 80.0 ~ 94.0 |
Special Service ToolsDescription and Operation
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filt ...
Canister Close Valve (CCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
Shift Lever Repair procedures
Removal
1.
Remove the center console.
(Refer to Body - " Floor Consol")
2.
Disconnect the sports mode connector (A).
3.
Remove the shift cable assembly (A) from the shift lever assembl ...