Hyundai Equus: Start/Stop Button Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Repair procedures
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad center panel.
(Refer to Body - "Crash Pad Center Panel") |
| 3. |
Remove the start/stop button connector (A) from the crash pad center panel.
|
| 4. |
Remove the start/stop button (B) after loosening the screws.
|
| Installation |
| 1. |
Install the start/stop button after connecting the connector. |
| 2. |
Install the crash pad center panel. |
| 3. |
Connect the negative (-) battery terminal. |
Start/Stop Button Components and Components Location
Component
...
See also:
Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you
drive and when you drive.
Each of these factors affects how many miles (kilometers) you can get from a
gallon (l ...
Trunk Lid Key Holder Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply p ...
If engine doesn't turn over or turns over slowly
1. Be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake
is set.
2. Check the battery connections to be sure they are clean and tight.
3. Turn on the interior light. If the ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com