>

Hyundai Equus: Solenoid Valve Components and Components Location - Air Suspension System - Suspension System - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Solenoid Valve Components and Components Location

Components

1. Connected to air tube
2. Bracket
3. Connector

    Compressor Repair procedures
    Removal     • This system combines a sensor and electronic parts with mechanical components, so be careful not to subject the system to strong impacts. • If any ...

    Solenoid Valve Description and Operation
    Description Four air spring solenoid valves (‘-’ control) and one ambient solenoid valve are embedded inside this solenoid valve block as shown in the circuit diagram below. When connecting ...

    See also:

    Purge Control Solenoid Valve (PCSV) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...

    Turn signals and lane change signals
    The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). Green arrow indicators on the instrument panel indicate which turn ...

    Puddle lamp
    When all the doors (and trunk) are locked and closed, the puddle lamp will come on for about 15 seconds if any of the below is performed. - When the door unlock button is pressed on the smart k ...

    Categories

    Hyundai Equus Manuals

    © 2011-2025 Copyright www.heqmanual.com