>
Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be held to a minimum.
Power Seat Motor Repair procedures
Inspection
Slide Motor Limit Switch
1.
Disconnect the limit switch (A) and operate the limit switch.
2.
Check for continuity between the terminals.
3.
Make sure that the seat operation is ...
Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. Knock Sensor (KS) is
installed on the cylinder block and senses engine knockin ...
Photo Sensor Description and Operation
Description
The photo sensor is located at the wind shield glass.
The photo sensor contains a photovoltaic (sensitive to
sunlight) diode. The solar radiation received by its light receiving
p ...