>
Hyundai Equus Manuals

Hyundai Equus: Repair procedures - Cowl Top Cover - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Repair procedures

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the cap (A) and remove the nuts, then remove the wiper arm (B).
Tightening torque :
22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.
Disconnect the nozzle hose (A).
3.
Detach the clips, then remove the cowl top cover (B).

4.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    Components and Components Location
    Component Location 1. Cowl top cover ...

    Floor Console
    ...

    See also:

    Blind Spot Detection Indicator Repair procedures
    Removal Blind Spot Detection Warnig Indicator 1. Disconnect the negative (-) battery terminal. 2. Remove the mirro (A). Installation Blind Spot Detection Warnig Indicator 1. Install the ...

    Tire specification and pressure label
    The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures re ...

    Front Wheel Speed Sensor Repair procedures
    Removal 1. Remove the connector after removing the front wheel speed sensor clip. 2. Remove the front wheel speed sensor. (Refer to Driveshaft and Axle - "Front Axle Assembly") 3. Install ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com