Hyundai Equus: Rear Variable Damper Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Suspension System / Air Suspension System / Rear Variable Damper Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Suspension System / Air Suspension System / Rear Variable Damper Description and Operation
| Description |
The rear variable damper consists of a damper and an upper
mounting bracket. This damper determines vehicle behavior through the
acceleration sensor in the ECS ECU, and it adjusts the damping force
depending on the road surface and driving conditions.
| Operation |
Depending on the input signal, the rear variable damper
adjusts the slider inside the control valve to control the flow rate in
the valve and change the damping force.
Rear Variable Damper Components and Components Location
Components
1. Sub frame2. Rear shock absorber3. Air spring4. Rear upper arm5. Assist arm6. Trailing arm
...
Rear Variable Damper Schematic Diagrams
Circuit Diagram
1.
Rear variable damper connector
2.
Rear variable damper terminal function
TerminalFunction1Variable damper (-)2Variable damper (+)
3.
Circuit diagram ...
See also:
TPMS Receiver Description and Operation
Description
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state.
B.
In this state, there is no Auto-Lo ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Schematic Diagrams
Circuit Diagram
...
Water pump Repair procedures
Removal and Installation
Water Pump
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the air du ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com