>
Inspection |
1. |
Check signal waveform of Input speed sensor using the GDS.
|
Repair procedures
Operation and Leakage Check
Check all of the following items
ComponentProcedureBrake Booster (A)Check brake operation by applying the brakes during a test
drive. If the brakes do not work proper ...
Assist Door Module (ADM) Components and Components Location
Component
...
Power Mosfet Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of the blower motor.
3.
Select the control switch to raise the voltage until high ...