Hyundai Equus: Ignition Coil Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Electrical System / Ignition System / Ignition Coil Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Electrical System / Ignition System / Ignition Coil Description and Operation
| Description |
An ignition coil is an induction coil in an engine's ignition
system which transforms the battery's low voltage to the high voltage
needed to create an electric spark in the spark plugs to ignite the
fuel. Coils have an internal resistor while others rely on a resistor
wire or an external resistor to limit the current flowing into the coil
from the battery 12 V supply.
Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordance with the ...
Ignition Coil Specifications
Specification
ItemSpecification Primary Coil Resistance (x)0.62 ± 10% [20°C (68°F)]Secondary Coil Resistance (kx)7.0 ± 15% [20°C (68°F)]
...
See also:
Schematic Diagrams
Circuit Diagram
...
Rear Console Cover Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply p ...
Accelerator Position Sensor (APS) Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com