>
Removal |
1. |
Remove the front wheel and tire (A) from front hub .
|
2. |
Remove the front assembly.
(Refer to Front Suspension System - "Front Strut Assembly") |
3. |
Disconnect the front upper arm (A) with the front strut assembly bracket (B) by loosening the bolt.
|
4. |
Installation is the reverse of removal.
|
5. |
Check the alignment.
(Refer to Tires/Wheels - "Alignment")
|
Inspection |
1. |
Check the bushing for wear and deterioration. |
2. |
Check the ball joint for rotating torque. |
Steering Wheel Remote Controller (SWRC) Components and Components Location
Components
1. Left Top Remote Control Switch (Audio)2. Right Top Remote Control Switch (Haptic)3. Left Bottom Remote Control Switch (Bluetooth+LDWS+Mute)4. Right Bottom Remote Control Switch (Cru ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention.
Supplemental Restra ...
Components and Components Location
Components Location
1. Compressor2. Air tank3. Air tube4. ECU5. Rear CDC Damper6. Rear spring7. Front air strut assembly8. G-Sensor9. Height sensor
...