>
Fog lights are used to provide improved visibility and avoid accidents when visibility is poor due to fog, rain or snow etc. The fog lights will turn on when fog light switch (1) is turned to ON after the headlights are turned on.
To turn off the fog lights, turn the switch to OFF.
CAUTION
When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor or unnecessary battery and generator drain could occur.
Intake Manifold Components and Components Location
Components
1. Purge control solenoid valve (PCSV) and hose2. PCV hose3. ETC module4. Intake manifold module5. MAP sensor
...
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may c ...
Wipers & Washers
A : Wiper speed control
-MIST – Single wipe
-OFF – Off
-AUTO – AUTO control wipe
-LO – Low wiper speed
-HI – High wiper speed
B : Auto control wipe time adjustment
C :Wash with brief wipes ...