The air spring & damper is one unit so that it is not possible to make separation.
The average pressure of front air spring is around 7.5 bar.
When the front air spring is delivered as service spare part, the air is
filled with the pressure of 3 bar.
- Air spring
Controls the vehicle height in real time]
- CDC damper
Controls damping force depending on the road condition
While CDC damping control, 4 Corner will be controlled by
same damping force (hard, soft). The system controls all required
factors which is necessary for all driving conditions such as pitch,
roll, ride and sky hook. The solenoid only cannot be replaced, that is
the air damper assembly should be replaced if the solenoid valve is
failed. The damping force will be the maximum (hard damper), if the
current of solenoid valve is not supplied.
Components
1. Air spring2. CDC damper3. Connector4. Air tube connector
1. Insulator cap2. Insulator assembly3. Spring upper pad4. Dust cover5. Bump stopper6. Coil spring7. Shock absorber
...
Circuit Diagram
1.
Front air strut connector
2.
Front air terminal function
TerminalFunction1Variable damper (-)2Variable damper (+)
3.
Circuit diagram ...
See also:
Side impact air bag
Your vehicle is equipped with a side impact air bag in each front and outboard
rear seat. The purpose of the air bag is to provide the vehicle's driver and/or
the front and outboard rear pas ...
Input Speed Sensor Description and Operation
Description
Input speed sensor is a vital unit that measures the rate of
rotation of the input shaft inside the transmission and delivers the
readings to the TCM. The sensor provides critical ...
LCD Modes
...