Hyundai Equus: Hood Assembly Components and Components Location

Repair procedures

Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by turning the hood overslam bumpers (C). ...

Hood Assembly Repair procedures

Replacement     • Be careful not to damage the hood and body.     • When removing and installing the hood, an assistant is necessary. • Wh ...

See also:

Rain Sensor Repair procedures
Removal     The dust or foreign substance on the rain sensor have a bad effect upon the rain sensor capability,so protect the sensor surface with protection cover until instal ...

Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to "Specification" Removal 1. Turn the ignition swit ...

Components and Components Location
Component Location 1. Cluster assembly2. Battery sensor3. Washer fluid level sensor4. Fuel gauge sender ...