>

Hyundai Equus: Limousine Front Body - Body Dimensions - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Limousine Front Body

Front body A

Roof panel front corner

Front pillar outer corner

Hood hinge mounting hole (O13)

Shockabsorber mounting hole
(O24)
Front end module mounting hole (O9)

Cowl top cover mounting hole (O7)


Front body B

Hood hinge mounting hole (O13)

Front end module mounting hole (O9)

Fender apron panel tooling hole (O7)

Cowl top cover mounting hole (O7)

Front side member tooling hole (O8)

Front side member tooling hole (O11)


Wiring harness mounting hole (12X16)

Wiring harness mounting hole (12X16)



Front body C

Fender apron panel tooling hole (O7)

Front side member tooling hole (8X8)

Front side member tooling hole (O7)

Front side member tooling hole (O8)

Front side member tooling hole (O11)

Wiring harness mounting hole (12X16)

Wiring harness mounting hole (12X16)

Front crash member bracket tooling hole (O9)
Front crash member bracket tooling hole (O9)

    Sedan Under Body
    Under body Projected dimensions Tooling hole (O25)Front sub frame mounting pipe (O25)Tooling hole (O14)Front sub frame mounting pipe (O27)Tooling hole (O15)Tooling & paint drain hole (O6.6 ...

    Limousine Side Body
    Side body A Front side member tooling hole (O8)Fender apron panel tooling hole (O7)Front door hinge upper mounting hole (O13)Front door hinge lower mounting hole (O13) Fender mounting hole (O6.6 ...

    See also:

    Transmission Control Module (TCM) Repair procedures
    Inspection TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check poin ...

    Canister Close Valve (CCV) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...

    Relay Box (Passenger Compartment) Description and Operation
    Description 1. Smart Junction Box(SJB) (1) General function : Interior Junction Box + some functions of BCM (2) It controls loads with CAN communication and IPS. (3) IPS stands for Intel ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com