Hyundai Equus: Brake System

Pre-active Seat Belt (PSB) Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the safety belt (A) by turning it in the direction of arrow using a flat ...

General Information

...

See also:

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert ...

Blind Spot Detection Switch Components and Components Location
Component ...

Wheel nut tightening torque:
Steel wheel & aluminum alloy wheel: 65~79 lb·ft (9~11 kg·m) If you have a tire gauge, remove the valve cap and check the air pressure. If the pressure is lower than recommended, drive slowly ...