Hyundai Equus: Rear Variable Damper Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Suspension System / Air Suspension System / Rear Variable Damper Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Suspension System / Air Suspension System / Rear Variable Damper Description and Operation
| Description |
The rear variable damper consists of a damper and an upper
mounting bracket. This damper determines vehicle behavior through the
acceleration sensor in the ECS ECU, and it adjusts the damping force
depending on the road surface and driving conditions.
| Operation |
Depending on the input signal, the rear variable damper
adjusts the slider inside the control valve to control the flow rate in
the valve and change the damping force.
Rear Variable Damper Components and Components Location
Components
1. Sub frame2. Rear shock absorber3. Air spring4. Rear upper arm5. Assist arm6. Trailing arm
...
Rear Variable Damper Schematic Diagrams
Circuit Diagram
1.
Rear variable damper connector
2.
Rear variable damper terminal function
TerminalFunction1Variable damper (-)2Variable damper (+)
3.
Circuit diagram ...
See also:
In-car Sensor Description and Operation
Description
An in-car air temperature sensor is located in the heater control.
The sensor contains a thermistor which measures the
temperature of the cabin. The signal determined by the resistan ...
Starter Specifications
Specification
ItemSpecificationRated voltage12 V, 1.7 kWThe number of pinion teeth13Performance[No-load, 11.5 V]AmpereMax. 85 ASpeedMin. 2,550 rpm
...
To Reset the Power Trunk
If the battery has been discharged or disconnected, or if the related fuse has
been replaced or disconnected, reset the Power Trunk as follows:
1. Move the shift lever to the P(Park) position.
2. ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com