Hyundai Equus: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
| Specifications |
Direct control VFS[UD/C]
x Control type : Normal low type
| Control Pressure kpa (kgf/cmx, psi) | 0~1569.06 (0~16,0~227.57) |
| Current value(mA) | 0~1100 |
| Internal resistance(x) | 5.0~5.6 |
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description and Operation
Description
UD Clutch control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the UD Clutch. ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Schematic Diagrams
Circuit Diagram
...
See also:
Canister Close Valve (CCV) Description and Operation
Description
Canister Close Valve (CCV) is normally open and is installed
on the canister ventilation line. It seals evaporative emission control
system by shutting the canister from the atmosph ...
ECU Description and Operation
Description
Analyzes each variety sensor and communication data and executes air suspension control.
That part controls system and maintains function. ...
Thermostat Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
4.0~6.0N.m (0.4~0.6kgf.m, 3.0~4.4lb-ft)
2.
Remove the air duct, air intak hose and ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com