>

Hyundai Equus: 6 Speed Clutch Control Solenoid Valve Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: 6 Speed Clutch Control Solenoid Valve Specifications

Specifications
Direct control VFS[6/C]
x Control type : Normal low type
Control Pressure kpa (kgf/cmx, psi)
0~1569.06
(0~16,0~227.57)
Current value(mA)
0~1100
 Internal resistance(x)
5.0~5.6

    6 Speed Clutch Control Solenoid Valve Description and Operation
    Description 6 Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 6 Clutch. ...

    6 Speed Clutch Control Solenoid Valve Schematic Diagrams
    Circuit Diagram ...

    See also:

    Warning message
    If the detecting sensor performance is low or overheated by foreign substances on the rear bumper, the message will appear to notify the driver. Also, the message may appear when there is heavy ...

    Pre-tensioner seat belt
    Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly against the occup ...

    Rear Upper Arm Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com