>

Hyundai Equus: 6 Speed Clutch Control Solenoid Valve Description and Operation - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: 6 Speed Clutch Control Solenoid Valve Description and Operation

Description
6 Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 6 Clutch.

    Presure Switch Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    6 Speed Clutch Control Solenoid Valve Specifications
    Specifications Direct control VFS[6/C] x Control type : Normal low type Control Pressure kpa (kgf/cmx, psi)0~1569.06 (0~16,0~227.57)Current value(mA)0~1100 Internal resistance( ...

    See also:

    Canister Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the service cover (A). 3. Disconnect the fuel tank pressure sensor connector (A) and the ...

    Description and Operation
    Description The ECM (Electro Chromic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, in order the user not to be dazzled by the light. The front loo ...

    Jack and tools
    The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. (1) Jack handle (2) Jack (3) Wheel lug nut wrench ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com