Hyundai Equus: Valve Body Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Valve Body Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Valve Body Description and Operation
| Description |
The valve body is essential to automatic transmission control
and consists of various valves used to control the oil feed from the
oil pump. Specifically, these valves consist of pressure regulator
valves, oil redirection valves, shift valves, and manual valves. The
valve body also features electronic solenoid valves that ensure smooth
gear changes.
Oil Filter Repair procedures
Replacement
1.
Draining ATF totally.
2.
Remove the oil pan (A).
3.
Must be replaced by new oil pan.
Integrated filter in the oil pan is not replaceable.
4.
Add ...
Valve Body Components and Components Location
Components Location
1. Input speed sensor2. Middle speed sensor3. Output speed sensor4. E Module5. Line presure control solenoid valve6. Damper clutch control solenoid valve7. ON/OFF solenoid val ...
See also:
Middle Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of middle speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Heated Steering wheel Repair procedures
Inspection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 10.0 kx ± 10% (25°C)
B.
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 x ± 10%
...
Hood Lift Repair procedures
Replacement
•
When removing and installing the hood lifter, an assistant is necessary.
•
When removing the clips, use a clip remover.
1.
Using a screwdrive ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com