Hyundai Equus: Knock Sensor (KS) Schematic Diagrams

Knock Sensor (KS) Specifications

Specification ItemSpecificationCapacitance (pF)950 ~ 1,350 ...

Knock Sensor (KS) Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake And Exhaust System� in EM group). 3. Disconnect ...

See also:

Accelerator Pedal Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Disconnect the accelerator control ...

Instrument Cluster Control
Adjusting Instrument Cluster Illumination The brightness of the instrument panel illumination can be adjusted by pressing the illumination control buttons (“+� or “-�) when the Engine S ...

Power Trunk Module Drive Unit Repair procedures
Removal     • When removing and installing the trunk lid, an assistant is necessary. • Take care not to be closed the trunk when removing the push rod. • Wear ...