The smart cruise control unit is installed on the front
center of the chassis. A radar sensor is embedded in the front section
of the unit. This sensor detects vehicles and objects in front of the
vehicle.The radar sensor can detect up to 64 objects ahead of a vehicle.
The alarm goes off when the vehicle deviates from the horizontal and
vertical alignment reference points during operation. This sensor
communicates with the dashboard, warning buzzer, smart cruise control
switch, Electronic Stability Program (ESP), ECM, and TCM via CAN
communication.The sensor controls vehicle speed through CAN
communication between the Electronic Stability Program (ESP) system and
the ECM and TCM.
Description
The smart cruise control system allows a driver to program
the vehicle to control the speed and following distance detecting the
vehicle ahead without depressing the brake pedal and ...
Specification
ItemSpecificationPower supply(V)12Operation voltage (V)9 ~ 16
...
See also:
Hood Seal Weatherstrip Repair procedures
Replacement
1.
Detach the clips, then remove the hood seal weatherstrip (A).
•
Be careful not to scratch the hood seal weatherstrip.
2.
Installation is the rever ...
Assist Door Module (ADM) Description and Operation
Description
1.
Assist Door Module (ADM)
(1)
Main features
ItemExplanationNotesInstallation location Passenger side door trimComponent configuration
1.
Embedded with CAN Communication IC
...
Air Filter Description and Operation
Description
The air filter removes any impurities in the intake air.
Composition
This component consists of an air filter, silencer, bracket, and more.
Function of air filter
•
Eliminates a ...