Hyundai Equus: Exhaust Manifold Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Mechanical System / Intake And Exhaust System / Exhaust Manifold Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Mechanical System / Intake And Exhaust System / Exhaust Manifold Components and Components Location
| Components |
| 1. Exhaust manifold heat protector 2. Exhaust manifold | 3. Exhaust manifold gasket 4. Exhaust manifold stay |
Intake Manifold Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the engine room cover (A ...
Exhaust Manifold Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the engine room cover (A ...
See also:
Passenger Airbag (PAB) Module Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad
and protects the front passenger in the event of a frontal crash. The
SRSCM determines if and when to deploy the PAB.
...
Description and Operation
Description
You can up & down rear curtain automatically by pressing
the rear curtain switch. Rear curtain protect passenger from a direct
ray of light by covering rear glass.
...
Front / Rear Parking Assist System Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the BCM unit.
(Refer to Body Control Module - "Body Control Module")
Installation
1.
Install the BCM unit.
2.
Conne ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com