>
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air.
Main air cleaner
1. Push the top of the fastener to remove the cover.
2. Loosen the air cleaner cover attaching clips and open the cover.
3. Wipe the inside of the air cleaner.
4. Replace the air cleaner filter.
5. Lock the cover with the cover attaching clips.
Chamber air cleaner
1. Loosen the air cleaner cover attaching clips and open the cover.
2. Replace the air cleaner filter after pulling up the locking tab (1).
3. Lock the cover with the cover attaching clips.
Replace the filter according to the Maintenance Schedule.
If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals. (Refer to “Maintenance under severe usage conditions” in this section.)
CAUTION
Front Seat Assembly Repair procedures
Replacement
1.
Remove the safety belt (A) by turning it in the direction of arrow using a flat-head screwdriver.
2.
Remove the front seat track mounting cover.
3.
After loosening the mount ...
Coolant Repair procedures
Engine Coolant Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious
scalding could be caused by hot fluid under high pressure escaping from
...
Removable towing hook (if equipped)
1.Open the trunk, and remove the towing hook from the tool case.
2.Remove the hole cover by pressing the lower part of the cover on the front
or rear bumper.
3.Install the towing hook by turning ...