>

Hyundai Equus: Assist Door Module (ADM) Description and Operation

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body Electrical System / Body Network System / Assist Door Module (ADM) Description and Operation

Description

1.

Assist Door Module (ADM)

(1)

Main features

Item

Explanation

Notes

Installation location

Passenger side door trim

Component configuration

1.	Embedded with CAN Communication IC

2.	Embedded with LIN Communication IC

3.	Embedded with Door Lock/Unlock IC

Main features

1.	Power window controlled via passenger side power window switch

2.	Outside mirror folding/unfolding via B_CAN signal from DDM Start

3.	Manually adjust outside mirror via DDM manual switch control signal received via CAN (up, down, left, right)

4.	Save and recall mirror position via memory switch > 2 drivers

5.	Outside mirror control (auto) synchronized with the reverse gear signal

-	Outside mirror is automatically adjusted downward by 5 degrees when reverse gear signal is received

6.	Puddle Lamp & Pocket LED control through DDM signal received via CAN

7.	Door Lock/Unlock with signal from DDM via B_CAN

8.	CAN Communication (BCM CAN Communication Module)

9.	LIN Communication

(2)	For detail information about circuit diagram, refer to the power window switch. (Refer to Power Windows - "Power Window Switch")

Assist Door Module (ADM) Components and Components Location

Component ...

Rear Left Door Module (RLDM) Components and Components Location

Component ...

See also:

G Sensor Components and Components Location
Components Location 1. G-Sensor ...

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com