Hyundai Equus: Lighting control
Second generation VI (2009–2026) / Hyundai Equus 2009-2026 Owners Manual / Features of your vehicle / Lighting / Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of the following positions:
(1) OFF position
(2) Auto light / AFLS position
(3) Parking light position
(4) Headlight position
Auto light/AFLS position
When the light switch is in the AUTO light position while the engine is running, the taillights and headlights will be turned ON or OFF automatically depending on the amount of light outside the vehicle.
If your vehicle is equipped with the adaptive front lighting system (AFLS), it will also operate when the headlamp is ON.
CAUTION
- Never place anything over sensor (1) located on the instrument panel. This will ensure better auto-light system control.
- Don’t clean the sensor using a window cleaner. The cleaner may leave a light film which could interfere with sensor operation.
- If your vehicle has window tint or other types of metallic coating on the front windshield, the Auto light system may not work properly.
Parking light position (
)
When the light switch is in the parking light position, the tail, license and instrument panel lights are ON and the tail light indicator is ON.
Headlight position (
)
When the light switch is in the headlight position, the head, tail, license and instrument panel lights are ON.
✽ NOTICE
The Engine Start/Stop Button must be in the ON position to turn on the headlights.
Headlight escort function
If you turn the Engine Start/Stop Button to the ACC or OFF position with the
headlights ON, the headlights (and/or tail lights) remain on for about 5 minutes.
However, if the driver’s door is op ...
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when the headlamp high beams are switched
on.
To prevent the ...
See also:
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross ...
Highway driving
Tires
Adjust the tire inflation pressures to specification. Low tire inflation pressures
will result in overheating and possible failure of the tires.
Avoid using worn or damaged tires which m ...
Components and Components Location
Component Location
1. Windshield wiper arm & blade2. Wiper & washer switch3. Windshield washer hose4. Windshield wiper motor & linkage5. Washer motor6. Washer reservoir
...
Categories
Hyundai Equus Manuals
