Hyundai Equus: Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Auto Lighting Control System / Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Auto Lighting Control System / Components and Components Location
| Component Location |
| 1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) | 4. Tail lamps 5. IPM (Instrument Panel Module) |
Specifications
Specifications
ItemsSpecificationsRated voltage5VLoadMax. 1mA (Relay load)Detection illuminationsTail lampON : 74 ± 16 (Lux), 2.36 ± 0.08 (V)OFF : 148 ± 32 (Lux), 4.52 ± 0.1 (V)Head lampON : ...
Description and Operation
Description
In the state of IGN1 ON, when the multi function switch
module detects auto light switch on, tail lamp relay output and head
lamp low relay output are controlled according to the ve ...
See also:
Components and Components Location
Component Location
1. Cluster assembly2. Battery sensor3. Washer fluid level sensor4. Fuel gauge sender
...
Water pump Repair procedures
Removal and Installation
Water Pump
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the air du ...
Repair procedures
Removal
Parking Brake Shoe
1.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear tire and wheel.
3.
Remove the brake caliper and Rear disc brake. (Refer to Bra ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com