>
Inspection |
1. |
When checking the driver power window switch, select a vehicle type and "IPM" menu. |
2. |
Select "DDM (Driver Door Module)". |
3. |
Select option "Input/Output monitoring". |
4. |
To check the input value of power window switch in force mode, select option "ACTUATION TEST". |
1. |
When checking the assist power window switch, select a vehicle type and "IPM" menu. |
2. |
Select "ADM (Assist Door Module)". |
3. |
Select option "Input/Output monitoring". |
4. |
To check the input value of power window switch in force mode, select option "ACTUATION TEST". |
General Information
Identification Number Locations
Identification Number Description
Vehicle Identification Number
1.
World Manufacturer Identifier (WMI)
- KMF : Commercial vehicle (Van)
- KMH : Passenger vehicl ...
License plate lamp replacement
1.Open the trunk.
2.Disconnect the negative battery cable.
3.Using a screwdriver, remove the trunk lid latch cover(1).
4.Using a screwdriver, remove the trunk lid switch(2), and disconnect ...
Ambient Temperature Sensor Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect ambient temperature sensor.
4.
Check the resistance of the ...