Hyundai Equus: Components and Components Location
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Components and Components Location
| Component Location |
| 1. Hood switch 2. Burglar horn 3. BCM 4. Key warning switch 5. Front door switch | 6. Front door lock actuator & switch 7. Rear door lock actuator & switch 8. Rear door switch 9. Trunk module switch 10. Buzzer |
Specifications
Specification
ItemSpecificationPower source3VOperating temperature-20°C ~ +60°C (-4°F ~ +140°F)RF ModulationFSKLF ModulationASKRF frequency433.92MHzLife of battery2years or more (at 20 times ...
Description and Operation
Description
Burglar Alarm State [B/A State]
B/A StateDescriptionDISARM
1.
In "DISARM" state, no vehicle start inhibition. So, when
door, hood, or Tailgate is opened, there is no alarm sound ...
See also:
Ambient Temperature Sensor Description and Operation
Description
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor; resistance will increase with lower te ...
Assist Power Seat Module(APSM) Description and Operation
Description
1.
Assist Power Seat Module (APSM)
(1)
Main features
ItemDescriptionInstallation location Lower section of the assist side seatComponent configuration
1.
Embedded with CAN Commu ...
Front Impact Sensor (FIS) Description and Operation
Description
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary p ...
Categories
Hyundai Equus Manuals
