>

Hyundai Equus: Front Seat Belt Buckle Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Front Seat Belt Buckle Repair procedures

Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the connectors (A).
3.
After loosening the mounting screws, then remove the memory power seat unit (B).

4.
Remove the front seat belt buckle connector wiring harness (A).

5.
After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

6.
Install in the reverse order of removal.
   
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.
    Front Seat Belt Buckle Components and Components Location
    Component Location 1. Front seat belt buckle ...

    Rear Seat Belt
    ...

    See also:

    Tire specification and pressure label
    The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures re ...

    Front Pillar Trim Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply pr ...

    Interior light
    When the interior light switch is in the DOOR position and all doors (and trunk) are locked and closed, the room lamp will come on for 30 seconds if any of the below is performed. - When the door ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com