>
Hyundai Equus Manuals

Hyundai Equus: Rear Wheel Guard Repair procedures - Body Side Molding - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Rear Wheel Guard Repair procedures

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Wheel Guard Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and nut, then remove the rear wheel guard (A).

3.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    Front Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

    Waist Line Molding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

    See also:

    Schematic Diagrams
    System Diagram 1. Front view camera2. PGS Unit3. AVN monitor (LCD)4. Front blind camera switch5. Rear view camera Block Diagram & Communications CategoryRoleVoltageI/OIgnition Power· R ...

    Door courtesy lamp
    The door courtesy lamp comes ON when the door is opened to assist entering or exiting the vehicle. It also serves as a warning to passing vehicles that the vehicle door is open. ...

    Accelerator Pedal Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Disconnect the accelerator control ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com