Hyundai Equus: Driveshaft and axle

Shift Lever Repair procedures

Removal 1. Remove the center console. (Refer to Body - " Floor Consol") 2. Disconnect the sports mode connector (A). 3. Remove the shift cable assembly (A) from the shift lever assembl ...

General Information

...

See also:

PGS Unit (Back & Blinde Unit) Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to Body - "Crach Pad") 3. Remove the glove box housing connector (A). 4. Remove t ...

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...

Compressor Components and Components Location
Components 1. Dyer2. Motor3. Connected to tube4. Reverse valve connector5. Connector for motor driveing ...