Hyundai Equus: Cruise Control System

Starter Relay Repair procedures

Inspection 1. Disconnect the battery negative terminal. 2. Remove the fuse box cover. 3. Remove the starter relay(A). 4. Using an ohmmeter, check that there is continuity between each ...

Description and Operation

Cruise Control The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and ...

See also:

Power Trunk Module Drive Unit Repair procedures
Removal     • When removing and installing the trunk lid, an assistant is necessary. • Take care not to be closed the trunk when removing the push rod. • Wear ...

Front Area Module(FAM) Description and Operation
Description FAM (Front Area Module) The FAM includes the functions for the following list : - Wiper control (Rain sensor communication and transfer Rain sensor request information to Wiper modu ...

Air Quality Sensor (AQS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Connect the GDS. 3. Check the output voltage of AQS between terminal 2 and 3. 1. DC 12V( Ignition)2. Sensor ground3. AQS signal Specif ...