>
Hyundai Equus: Cool and Warm Box Repair procedures
| Replacement |
| 1. |
Remove the rear seat cushion and seat back assembly.
(Refer to Body - "Rear Seat Assembly") |
| 2. |
Remove the tower console assembly (A).
|
| 3. |
Remove the rear console armrest (A) by loosening the bolts.
|
| 4. |
Slightly remove the rear console upper cover (A).
|
| 5. |
Disconnect the connectors to entirely remove the rear console upper cover (A).
|
| 6. |
Remove the cool and warm box bezel cover (A).
|
| 7. |
Slightly remove the lower tray (A).
|
| 8. |
Disconnect the connectors to entirely remove the lower tray (A).
|
| 9. |
Remove the rear console assembly (A).
|
| 10. |
Remove the cool and warm box assembly (A) from the rear console assembly.
|
| 11. |
Remove the cool and warm box motor (A).
|
| 12. |
Install in the reverse order of removal. |
Cool and Warm Box Description and Operation
HeaterRecalling Position into Memory
1. Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2. Press the desired memory button (1 or 2). The system will beep once, then the
driver's ...
Repair procedures
Air Injection Procedure
•
When injecting air into the air suspension system, always
raise the vehicle off the ground using a lift to prevent potential
damage to the ...
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may c ...