>

Hyundai Equus: Battery Specifications - Charging System - Engine Electrical System - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Battery Specifications

Specifications
Item
Specification
Model type
CMF100L-DIN
Capacity [20HR/5HR] (AH)
100/80
Cold Cranking Amperage (A)
780 (SAE) /624 (EN)
Reserve Capacity (Min)
190

    Battery Description and Operation
    Description 1. The CMF(Closed Maintenance Free) battery is, as the name implies, totally maintenance free and has no removable battery cell caps. 2. The CMF(Closed Maintenance Free) batter ...

    Battery Repair procedures
    Removal 1. Disconnect the battery sensor connector (A), battery nagative terminal (B) and positive terminal (C). 2. Disconnect the vent hose connector (A) from the battery air vent hole. 3. ...

    See also:

    Crash Pad Lower Panel Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

    4&OD Clutch Control Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Power Trunk (if equipped)
    (1) Power Trunk Main Control button (2) Power Trunk Open button (3) Power Trunk Close button (4) Power Trunk Lock button To open: 1. Make sure the shift lever is in P(Park). 2. Then do one o ...

    Categories

    Hyundai Equus Manuals

    © 2011-2025 Copyright www.heqmanual.com