Hyundai Equus: Alternator Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Electrical System / Charging System / Alternator Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Engine Electrical System / Charging System / Alternator Specifications
| Specification |
| Item | Specification |
| Rated voltage | 13.5V , 180A |
| Speed in use | 1,000 ~ 18,000rpm |
| Voltage regulator | IC Regulator built in type |
| Regulator reform mode voltage (V) [COM terminal] | 13.85 ~ 14.85 (-35°C) |
| 13.85 ~ 14.80 (15°C) | |
| 13.15 ~ 14.75 (50°C) | |
| Regulator Setting Voltage (V) [COM terminal] | 11.6 ~ 15.4 |
Alternator Description and Operation
Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this ...
Alternator Schematic Diagrams
Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target voltage data
to the alternator via a PWM signal.(High voltage: 4V or hig ...
See also:
Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally,
corners should always be taken under gentle acceleration. If you follow these suggestions,
tire wear will be ...
Driver's attention
The driver must be cautious in the below situations for the system may not assist
the driver and may not work properly.
The lane is not visible due to snow, rain, stain, a puddle or many other
...
Cruise Control Switch Repair procedures
Inspection
[Measuring Resistance]
1.
Disconnect the cruise control switch connector from the control switch.
2.
Measure resistance between terminals on the control switch when each function ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com