Hyundai Equus: Accelerator Position Sensor (APS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Accelerator Position Sensor (APS) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Engine Control System / Accelerator Position Sensor (APS) Specifications
| Specification |
| Accelerator Position | Output Voltage (V) | |
| APS1 | APS2 | |
| C.T | 0.7 ~ 0.8 | 0.33 ~ 0.43 |
| W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |
Accelerator Position Sensor (APS) Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors ...
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
...
See also:
G Sensor Description and Operation
Description
There are a total of 3 acceleration sensors in the vehicle
that measure vehicle acceleration and communicate with the ECS ECU. The
ECS ECU calculates the vertical vibration speed, ...
Rear vanity mirror (if equipped)
To use the rear vanity mirror, press the cover and it will slowly open and the
mirror lamp will turn on.
CAUTION
Close the mirror cover securely. If the mirror cover is not closed, the lamp
...
High mounted stop light
1. Remove the rear seat
5 Seater
1.Disconnect the negative battery cable.
2.Remove the rear seat cushion.
3.Loosen the mounting bolts, then remove the rear seat back.
4.Disconnect the conne ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com