Hyundai Equus: 27 Brake Control Solenoid Valve Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / 27 Brake Control Solenoid Valve Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / 27 Brake Control Solenoid Valve Specifications
| Specifications |
Direct control VFS[27/B]
x Control type : Normal low type
| Control Pressure kpa (kgf/cmx, psi) | 0~1569.06 (0~16,0~227.57) |
| Current value(mA) | 0~1100 |
| Internal resistance(x) | 5.0~5.6 |
27 Brake Control Solenoid Valve Description and Operation
Description
27 Brake control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the 27 Brake. ...
27 Brake Control Solenoid Valve Schematic Diagrams
Circuit Diagram
...
See also:
Operating conditions
The indicator on the switch will illuminate when the BSD (Blind spot detection)
system switch is pressed with the Engine Start/Stop Button ON.
If vehicle speed exceeds 9.3 mph (15 km/h), the system ...
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Driver Door Module (DDM) Description and Operation
Description
1.
Driver Door Module (DDM)
(1)
Main features
ItemExplanationNotesInstallation positon Driver side door trimComponent configuration
1.
Embedded with CAN Communication IC
2.
...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com