Hyundai Equus: Sedan Rear Body
| Rear body |
|
|
|
| Roof panel rear corner | Side outer panel rear corner | Rear parkage tray panel tooling hole (O23) |
|
|
|
| Side outer panel rear corner | Tooling hole (14X10) | Tooling hole (O10) |
Sedan Interior
Interior A
Front inner pillar tooling hole (O9)Cowl cross bar mounting hole (O11)Front door checker mounting hole (O11)Side sill inner reinforcement tooling hole (O7)Seat belt height adjuster upp ...
Sedan Under Body
Under body
Projected dimensions
Tooling hole (O25)Front sub frame mounting pipe (O25)Tooling hole (O14)Front sub frame mounting pipe (O27)Tooling hole (O15)Tooling & paint drain hole (O6.6 ...
See also:
Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Loosen the airbag module mounting bolts (2EA).
3.
Remove the wiring fixing c ...
Specifications
Specification
ItemsBulb Wattage (W)FrontHead lamp (High)55Head lamp (Low)35 (HID) or LEDFront turn signal lampLEDFront fog lampLEDPosition lampLEDDoor mirrorLEDRearRear stop/tail lamp (Outside) L ...
Mode Control Actuator Description and Operation
Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the
mode control actuator based on the signal of the A/C control unit. ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com