>
Hyundai Equus: Specifications
| Specifications |
| Items | Specification | |
| Hood | Type | Rear hinged, gas lifter type |
| Front Door | Construction | Front hinged, full door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Rear Door | Construction | Front hinged, full door construction |
| Regulator system | Wire drum type | |
| Locking system | Pin-fork system | |
| Trunk Lid | Type | Front hinged, power trunk lid type (option ) |
| Seat Belts | Front | 3 point type with Emergency Locking Retractor (E.L.R) |
| Rear | 3 point type with Emergency Locking Retractor (E.L.R) | |
| Tightening Torque |
| Items | N.m | Kgf.m | lb-ft | |
| Front and rear doors | Door hinge to body | 37.3 ~ 41.2 | 3.8 ~ 4.2 | 27.5 ~ 30.4 |
| Door hinge to door | 9.8 ~ 19.6 | 1.0 ~ 2.0 | 7.2 ~ 14.5 | |
| Door checker to door | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door checker to body | 16.7 ~ 21.6 | 1.7 ~ 2.2 | 12.3 ~ 15.9 | |
| Outside handle base mounting bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door latch mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Door module mounting bolts | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Door glass mounting bolt | 8.8 ~ 11.8 | 0.9 ~ 1.2 | 6.5 ~ 8.7 | |
| Trunk Lid | Trunk lid striker mounting bolts | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 |
| Trunk lid latch mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Trunk lid key holder mounting bolts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 | |
| Hood | Hood hinge to body | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 |
| Hood hinge to hood | 21.6 ~ 26.5 | 2.2 ~ 2.7 | 15.9 ~ 19.5 | |
| Hood latch to body | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
| Seat | Front seat mounting bolts | 34.3 ~ 53.9 | 3.5 ~ 5.5 | 25.3 ~ 39.8 |
| Front seat mounting nuts | 23.5 ~ 35.3 | 2.4 ~ 3.6 | 17.4 ~ 26.0 | |
| Rear seat back mounting bolts | 16.7 ~ 25.5 | 1.7 ~ 2.6 | 12.3 ~ 18.8 | |
| Rear seat frame mounting bolts | 16.7 ~ 25.5 | 1.7 ~ 2.6 | 12.3 ~ 18.8 | |
| Rear seat frame mounting nuts | 12.7 ~ 18.6 | 1.3 ~ 1.9 | 9.4 ~ 13.7 | |
| Seat belt | Height adjuster mounting bolts | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 |
| Front seat belt upper anchor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Front seat belt lower anchor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Front seat belt pretensioner mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear seat belt lower anchor mounting bolts | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear center seat belt retractor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Rear seat belt retractor mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Seat belt buckle mounting bolt | 39.2 ~ 53.9 | 4.0 ~ 5.5 | 28.9 ~ 39.8 | |
| Outside rearview mirror | Outside rearview mirror mounting nuts | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
| Wiper arm | Wiper arm mounting nuts | 22.6 ~ 31.4 | 2.3 ~ 2.7 | 16.6 ~ 19.5 |
| Sunroof | Sunroof mounting nuts | 3.9 ~ 5.9 | 0.4 ~ 0.6 | 2.9 ~ 4.3 |
| Sunroof mounting bolts | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 | |
Special Service ToolsFront Pillar Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply pr ...
Limousine Rear Body
Rear body
Roof panel rear cornerSide outer panel rear cornerRear parkage tray panel tooling hole(O23)Side outer panel rear cornerTooling hole (14X10)Tooling hole (O10)
...
Filter replacement
1. With the glove box open, remove the stoppers on both sides to allow the glove
box to hang freely on the hinges.
2. Remove the cylinder at the left of the glove box.
3. Remove the cl ...