Hyundai Equus: Rear Axle Assembly

Front Hub / Knuckle / Tone Wheel Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub .     Be ca ...

Rear Hub - Carrier Components and Components Location

Component 1. Rear hub assembly2. Dust cover3. Rear knuckle4. Rear brake disc ...

See also:

Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, and put a finger on t ...

Opening the Hood
...

Spliter Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console. (Refer to Body - "Floor Console Assembly") 3. Remove the spliter unit (A) after disconnecting the con ...