Hyundai Equus: 4&OD Clutch Control Solenoid Valve Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / 4&OD Clutch Control Solenoid Valve Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / 4&OD Clutch Control Solenoid Valve Specifications
| Specifications |
Direct control VFS[4&OD/C]
x Control type : Normal high type
| Control Pressure kpa (kgf/cmx, psi) | 0~1569.06 (0~16,0~227.57) |
| Current value(mA) | 0~1100 |
| Internal resistance(x) | 5.0~5.6 |
4&OD Clutch Control Solenoid Valve Description and Operation
Description
4&OD Clutch control solenoid valve is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the 4&OD Clutch. ...
4&OD Clutch Control Solenoid Valve Schematic Diagrams
Circuit Diagram
...
See also:
External AMP Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Open the trunk, remove the right trunk trim.
(Refer to Body - "Trunk Trim")
3.
Remove the external amplifier after disconneting ...
Heated Oxygen Sensor (HO2S) Troubleshooting
Signal Waveform
Fig.1) The signal waveforms of front HO2S(the upper) and heater(the lower) at idle
Fig.2) The signal waveforms of rear HO2S(the upper) and heater(the lower) at idle
Fig.3) Typical ...
For best battery service
The battery is in the trunk.
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or t ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com