>

Hyundai Equus: 6 Speed Clutch Control Solenoid Valve Schematic Diagrams - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: 6 Speed Clutch Control Solenoid Valve Schematic Diagrams

Circuit Diagram

    6 Speed Clutch Control Solenoid Valve Specifications
    Specifications Direct control VFS[6/C] x Control type : Normal low type Control Pressure kpa (kgf/cmx, psi)0~1569.06 (0~16,0~227.57)Current value(mA)0~1100 Internal resistance( ...

    6 Speed Clutch Control Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    See also:

    Emergency towing
    If towing is necessary, we recommend you to have it done by an authorized EQUUS dealer or a commercial tow truck service. If towing service is not available in an emergency, your vehicle may be t ...

    Description and Operation
    Description System Operation Typically, lane departure warning is activated at a speed over 70 km/h, but suppressed in case of unintentional lane departure when driver do not operate turn sign ...

    Oil Pump Components and Components Location
    Components 1. Oil filter cap2. Oil filter cap O-ring3. Oil filter element4. Oil filter body5. Oil filter assembly gasket6. Oil cooler7. Oil cooler gasket8. Lower oil pan9. Upper oil pan 10. Oil l ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com